- Description
- Technical Details
A complete CB antenna system with all the parts needed to get you up and running. This kit consists of a fiberglass CB antenna, 4-bolt mirror mount, and 12 feet of coax cable. Just add a radio along with this kit and you'll have everything you need for a complete CB system
Tuning Procedure:
1. Check your SWR on channels 1 and 40.
2. If channel 40 is higher than 1, lower the antenna
3. To lower, remove the cap from the top of the antenna, and use a knife to trim back the insulation until you see the copper wire.
4. Pull out the copper wire (it will unwind from the antenna). Cut around 2" to start with with a pair of cutters.
5. Put the antenna cap back on, and re-check your SWR.
As long as channel 40 has a higher SWR reading than channel 1, keep removing copper wire.
When you're finished, channels 1 and 40 should have roughly the same SWR reading, and channel 20 should have your lowest reading.
WR-S4W Technical Specifications
Antenna Length | 4'
|
---|
Antenna Color | White
|
---|
Mount Type | 4-Bolt Mirror / ToolBox Mount
|
---|
Coax Cable | 12' RG58 with PL-259 connectors |
---|
Walcott Radio WR-S4W Reviews
Contact Us
📍
- Walcott Radio
- 2940 N Plainview Rd Walcott
- Walcott, IA 52773
📞
- Phone Support
- 1-844-925-2688
- M-F 10am to 5pm CST
🕘
- Store Hours
- M-F 9am-6pm
- Sat 9am-5pm
- Sun Closed
Copyright 2024 Walcott Radio
Visit our Store! 2940 N Plainview Rd Walcott, Iowa 52773 USA