- Description
Will This Work? - Try This Simple Test! While hearing the noise you want to filter, unscrew and unplug the coax antenna cable from the back of your radio (don't transmit!). If the noise is still there, the filter should work. If is goes away, you are receiving noise as a signal.
Power line filter used to remove unwanted RF (engine noise, inverter noise, other electronic interference) from your CB radio or stereo. CB radio noise filter is simple to connect and effective. The CB noise filter includes a 3-pin female power connector and is usable with radios that require less than 10 amps (i.e. Cobra, Uniden, Midland CB radio and many Galaxy, General, Connex radios).CBNF3AXX Features
- 12V Power Line Filter
- Includes 3-Pin Power Connection, Standard for most CB Radios
- Removes Unwanted RF Line Noise From Power Cord
Walcott Radio CBNF3AXX Reviews
Jason D.
11 years ago
Completely gets rid of unwanted RF interference through a power line.Does not get rid of unwanted RF interference through your coax/antenna.This power line filter really works - BUT - you the noise you're eliminating needs to be coming through your power line for this filter to be effective.
If you're getting unwanted engine noise in your CB, try removing the coax cable first. If you still hear the noise without your coax connected, this filter will work.
If the noise goes away, this filter will likely not get rid of the unwanted noise.
If you're getting unwanted engine noise in your CB, try removing the coax cable first. If you still hear the noise without your coax connected, this filter will work.
If the noise goes away, this filter will likely not get rid of the unwanted noise.
Contact Us
📍
- Walcott Radio
- 2940 N Plainview Rd Walcott
- Walcott, IA 52773
📞
- Phone Support
- 1-844-925-2688
- M-F 10am to 5pm CST
🕘
- Store Hours
- M-F 9am-6pm
- Sat 9am-5pm
- Sun Closed
Shop
My Account
Customer Service
Company Information
Copyright 2025 Walcott Radio
Visit our Store! 2940 N Plainview Rd Walcott, Iowa 52773 USA