President's new remote microphone straps to your steering wheel so you can keep your hands on 10 and 2 instead of reaching for the original microphone. The mic is equipped with a noise reduction circuit (NRC) to remove unwanted background noises from the vehicle or road. Two front mounted buttons all you to change the channel and also adjust the sensitivity of the noise reduction.
Installation is a breeze. Find a good spot on your steering wheel where it will be out of your way, strap the mount to the wheel until it's tight and secure. Put the retaining clip in place, slide the microphone on to the mount and click it in place. Plug the Bluetooth dongle into the 6 pin mic jack on your President, and turn on the radio. Flip the switch on the microphone and you'll hear a voice telling you the power is on, and connected. Boom, done. They also threw in a USB cable to recharge the lithium battery when not in use.
ACFD601 Technical Specifications
Mic Connection
6-Pin President
NRC
Noise Reduction Circuit
Battery
Rechargeable Lithium
Power Connection
USB-C
Compatibility (Partial List)
President Lincoln II+, George FCC, Bill II FCC, Walker III FCC, Harrison FCC, McKinley I & II, Ronald, Richard, Johnny III, Taylor FCC, Johnson II, Thomas FCC